|
Designed for use with concrete pavers & gardens. Prevents pavers from moving horizontally and provides a clean, permanent edge to your garden.
Open base allows grass roots to help anchor edging in place.
|
Installing Barrier™ as a Paver Edge |
Easy Installation For Professional Results
|
A 1" layer of coarse, dry sand is placed on top of the sub-base. Using 1" diameter pipe as screed rails, lay the pavers gently on the sand. Be sure to place the pavers firmly against their neighbours. Complete the laying process with whole pavers only. |
After all whole pavers are in place, use a hand trowel to carefully remove the screeded sand beyond the paver area. Install Barrier Landscape Edging firmly against the pavers using 8" landscape spikes, spaced 18" apart. |
Using a diamond blade, cut the paver pieces required and fill all the gaps in the project. Using a broom, spread dry coarse sand into the joints until all the joints between pavers are filled with sand. Backfill the border area around the project as soon as possible. |
When creating curves, snip supports and bend.
Spread or overlap the cut supports depending on whether you are creating an inside or outside curve.
Typical Paver Installation Cross-Section
Click to Enlarge
Download Complete Instructions
|
