Diamond™ Landscape Edging Installation |
1. Unroll edging on a flat surface. Edging can be easily cut with a sharp knife, garden sheers or a hacksaw. |
|
2. Create Shallow "V" Channel. Place the shovel straight down into the ground and rock back and forth. "V" Channel should be 1" wide and at least 2" deep along course.
|
3. Use Suregrip® spikes to secure edging within the channel every 2 to 3 feet. For radius applications use one stake every 1 foot. |
|
4. When joining 2 rolls together, overlap board and use a stake to connect. |
